Vortice QUADRO 100 Centrifugal Aspirator with Timer

Vortice Centrifugal Aspirator QUADRO 100 with Timer

Vortice Centrifugal Aspirator QUADRO 100 is used to obtain excellent results in the suction of polluting substances such as fine dust, fumes, vapours, etc.

Advantages of the Vortice QUADRO 100 Centrifugal Aspirator with Timer

This aspirator, thanks to the innovative motor and the large microfiber filter, is equipped with a high suction capacity, which allows you to suck in both air and powders. Equipped with an electronic timer, useful for automatically switching off the product after a certain pre-set time set during installation, which can vary between 3 and 20 minutes (default 3 minutes). The ideal solution for efficient vacuuming, in complete safety.

Features of the Vortice QUADRO 100 Centrifugal Aspirator with Timer

• Max current absorbed at max speed 0.13 A< /li>
• Max current absorbed at minimum speed 0.10 A
• Nominal Duct Diameter 100 mm
• Drain diameter 92.5/97 mm
• Frequency 50 Hz
• Protection degree IPX4
• Max absorbed power at max speed 28 W
• Max absorbed power at minimum speed 20 W
• Max ambient temperature for continuous operation 50 °C
• Voltage 220-240 V
• Max flow rate at max speed 25 l/s
• Max flow rate at max speed 90 m³ /h
• Max flow rate at minimum speed 18 l/s
• Max flow rate at minimum speed 65 m³/h
• Max pressure at maximum speed (mmH2O) 22
• Max pressure at max speed (Pa) 216
• Max pressure at min speed (mmH2O) 16
• Max pressure at min speed (Pa) 157
• Sound pressure Lp in free field [dB(A)] 3 m max speed 39.2
• Sound pressure Lp in free field [dB(A)] 3 m min speed 32.3
• Max RPM 1600
• Min RPM 1180
• Dimensions: L 239 x H 239 x D 117 mm
• Weight 1.82 Kg