These thermostats control the room temperature by means of an electronic sensor that controls an output relay. On the front of the devices there are:
- the adjustment knob for setting the chosen temperature
- the LEDs for signaling the operating status
Power supply: 230 Vac ± 10% 50/60Hz 0.6 W
Output contacts: 2 A cosφ 1 – 0.5
Room temperature adjustment range: 5 – 30 °C
Accuracy: ±0.5°C
Recommended installation height from the ground: 1.5 m (away from heat sources and air currents) do not install in boxes where dimmers are present
Coll. electrical via cable clamps: Max Ø 2.5 mm2
For heating and air conditioning systems: boilers, fan-coil units, air conditioners, fan coils
Prepared for: external “summer/winter” switch
Output contact: switching